Type: Airsoft Rifle.
Manufacturer: Sig Sauer.
Model: ProForce MCX Virtus.
Materials: Metal and Polymer.
Weight: 7 pounds (3kg).
Barrel: 11.6 inches (295mm).
Propulsion: AEG.
Action: Semi & Full Auto - SAO Electronic trigger.
Ammunition Type: 6mm plastic Airsoft BB's.
Ammunition Capacity: 120 (Mid cap).
Max FPS: 408 Tested (.20 gram).

Buy the magazine: GAGG-08-008
Buy the Battery: GS1063
Buy the charger: TEN01267

Trigger Pull: The trigger on the Sig Sauer ProForce MCX Virtus AEG Airsoft Rifle is essentially a Single Action only electric on off switch that can allow for semi and full auto shooting along with a safety position based on the sector switch position. Because of this it is fairly short and light weight. There can be a slight delay from the time you pull the trigger to when the BB is released as since the electric motor needs to first pull back the internal spring before being released. A higher voltage battery will shorten the time between your trigger pull and the Airsoft BB release. Higher voltage battery also increases the full auto cycle rate.

Accuracy: We did already perform my Field Test Shooting Video for the Sig Sauer ProForce MCX Virtus AEG Airsoft Rifle so we do have some information to share relating to the shooting abilities of this AEG Airsoft Rifle. During the Velocity Chronograph Test we were able to average 408 fps using .20 gram Airsfot BB’s, that was using the out of the box installed 120 spring. In terms of accuracy, our 10 shot grouping at 30 feet away yielded a 1.5 inch spread and when we placed the Sig Sauer ProForce MCX Virtus AEG Airsoft Rifle in full auto it did not open up that much more, only to around 2 inches since there is virtually no recoil to throw off full auto shot placement. You can watch our full Field Test Shooting Video to have a better view.

Build Quality: The build quality of the Sig Sauer ProForce MCX Virtus AEG Airsoft Rifle is exceptional with high quality material inside and out, this Airsoft Rifle is mostly metal with a CNC machined receiver and a hefty 7 pound weight to it. Internally you will find VFC Avalon Gearbox featuring improved bearings, quick change spring system, built in MOSFET, and powered by high torque neodymium magnet motors.

Realism: The Sig Sauer ProForce MCX Virtus AEG Airsoft Rifle is designed and licensed by Sig Sauer to be as close to their real steel version of the MCX Virtus as possible in every way. As expected you will find Sig Sauer and Virtus licensing all over, size, handling and weight are also true to the original.

Pros:

• Super high quality AEG Airsoft Rifle.
• Bolt locks back for easy hop-up adjustments.
• Sig Sauer designed and licensed.
• Lots of metal parts including the CNC machined metal receiver, rear stock guide rails and most mechanical moving parts.
• Lots of mounting points with it’s full length picatinny top rail with M-LOK handguard.
• Awesome internals, VFC Avalon Gearbox, quick change spring system, built in MOSFET, high torque neodymium magnet motors.
• Easy to mount a sling with it’s QD tactical sling mounts on handguard, lower receiver, and stock.
• Performed well in the Field test hitting close to claimed fps and easily shooting a 1.5 inch 10 shot group for 30 feet away.

Cons:

• No included sights so you will need to add your own iron, red dot or optical sight.
• Battery area is a bit tight so you will need fairly compact batteries.
• Comes with orange flash hider but can be swapped out.
• On the high end of the price spectrum.

Comments: The Sig Sauer ProForce MCX Virtus AEG Airsoft Rifle is not only a looker but also a performer and is one of the higher quality AEG AR Styled Airsoft Rifles out there. I know there are a ton of AR AEG Airsoft Rifles to pick from but if you want something a little bit different than the rest the Sig Sauer ProForce MCX Virtus AEG Airsoft Rifle is for sure one to look at. It is a bit more money up front but will offer exceptional performance and the high quality internals will not only perform well but will last the test of time saving you money long term.